Enhance your Micro Alignment Telescope with the

Enhance your Micro Alignment Telescope with the
latest technology…

We trust that your Taylor Hobson Micro Alignment Telescope is offering you reliable and accurate measurement results, however technological advances allow us to offer you two improvements to the speed and flexibility of your measurements:

1. CCTV camera for a clear view of your target:
A miniature CCTV camera can be fitted to the telescope eyepiece to remotely view the target when working for example in difficult locations. By viewing the target image on the monitor, parallax problems are eliminated and set-up made quicker, allowing the operator to adjust the machine tool, targets or fixtures that require setting, without having to return to the Telescope each time or rely on a second operator for directions. It also allows a number of operators to observe the target image at the same time, or alternatively one operator can view a series of Telescopes.

Or if you want to simplify life further …

2. CCD camera with software to automate and digitise your measurements:
a new high resolution CCD system with software automatically senses the centre position of the targets then calculates the displacement from a set datum to ensure a fast set up time with repeatable readings, as well as digitally outputting the result. This accessory is particularly useful on large alignment projects such as aircraft jigs or large machine tools since a single operator can make measurements and adjustments along the construction or fixture while the target is displayed on the monitor. Target readings are recorded along the component and can then be output as a graph/results table or saved for further analysis. Analysis of the results can give advice on the required precise adjustment of the component under construction to bring it in line quickly. Distance measurements can also be made to an accuracy of a few millimetres.