News: General News
8th July 2021
Seminar: 3D micro-surface measurements of precision components, Wednesday 8th November 2023, 8.30am - 12.15pm
12th October 2023 • Read »
4D Technology in conjunction with Quantum Design are hosting a workshop ‘Inteferometry for Metrology’ at the OpTIC Technology Centre, Glyndwr University, St Asaph on 16 March 2023.
23rd January 2023 • Read »
Taylor Hobson measurement products have been used for many years in the nuclear industry for checking, measuring and monitoring alignment and level. Camera systems and motorised focus accessories allow the telescope to be operated remotely from the telescope.
13th September 2022 • Read »
Peen marking/engraving for parts identification is a critical element in industries such as aviation, defence and medical
7th September 2020 • Read »
Shipbuilders around the world are currently facing the challenge of reducing their environmental impact. The alignment telescope is used for accurate alignment of engines, propeller shafting and stern tubes - reducing vibration and wear which cause fuel inefficiencies.
23rd April 2020 • Read »
A fresh approach to dimensional metrology from the comfort of your desk
Trawling the internet to research the best solution to your metrology problem is challenging in these busy and socially distanced times. Spectrum Metrology is therefore offering an easy way to view the full dimensional metrology range in one virtual showroom:
Browse the showroom and watch short, informative product demonstrations at the Schneider Messtechnik digital showroom & demo centre “Technikum”
You can visit in your own time from the comfort of your desk or arrange for an expert from our team to “walk“ side by side with you and provide just the insight you need – whether by phone or live chat.
If you like what you see then we are always happy to receive your component samples and arrange to send you a measurement report, video and recommendations
Of course we also have a range of instruments in our actual showroom should you wish to interact in the real world …
The Schneider virtual showroom can be accessed HERE:
Select ‘Flat workpieces’ from the noticeboard to view the VideoCAD 2D Geometry Measurement range
Select ‘cubic workpieces’ from the noticeboard to view the WM1 Workshop Video Measurement Microscopes
Or just enter the door on the left to browse …